• 9.5 litre fluid capacity
• 1000 cubic metres/min smoke output (35,314 cubic feet/min)
• 7 minute heat-up time
• On-board Universal timer remote with level control
• Timer Remote with level control
• 1500W Hi-Mass Vaporizing System
• Overheat protection
• Analogue Link socket

Mechanical Specifications: 

Power Requirements:7.2A @ 220-240 V14.4A @ 110 V 

Dimensions:685 mm x 345 mm x 225 mm 

Weight:19 kg 

Fluid capacity:9.5 litre

Fluid consumption (max.):
150ml/min
0.039 Imp. gallon/minThe ZR33 Hi-Mass is designed to generate instant atmosphere in large clubs and stage productions. It combines a range of features to create a powerful fog machine capable of supplying atmospheric effects.

The new Hi-Mass Vaporizing System guarantees even more output for longer periods, while maximum efficiency is still achieved. It requires only 1500 watts to produce a massive 1000 cubic metres of dense fog per minute. A 9.5 litre container ensures long operational periods without refilling. The ultimate in control options is available with DMX 512 as standard. An on-board remote is also included offering auto timer function extendable by the 8x-mode function. The smooth 0 - 100% fog output allows precision atmospheric control. Coupled with the Analogue Link facility, multi-machine control is possible from a single Jem Multifunctional Controller. In addition, a heavy-duty hanging bracket is fitted as standard to facilitate easy installation in any type of venue. ON-BOARD DMX
With onboard DMX you will have access to the machine from any DMX controller or desk. DIRECT THERMAL PROTECTION DEVICE (DTPD)
This small yet crucial component is the last line of defence against catastrophic failure. This machine's DTPD is made from a solid ceramic composite. This guarantees extremely precise overheat monitoring and is unaffected by ambient temperature changes. Electronic Pump Ramping (EPR)
EPR is an intelligent means of warning of a drop in temperature which could result in 'wet smoke' (residue). The pumps respond to this signal by running slower and pumping less fluid, thus allowing the heaters to restore optimum operational temperature. This guarantees a continuous flow of smoke using highly efficient, lower wattage heaters. Soft Start Electronics
The 'crack' created during the initial burst of smoke is caused by the pump pressure overcoming the incredible back pressure of the heat exchanger. The unique Soft Start Electronics in this machine gradually powers the pump, eliminating this crack and ensuring a quieter and smoother operational level following initial start up. Jem Multifunctional Remote
This reliable remote offers more than the usual auto timer and smoke level output controls. Easily engaged, the timer gives complete adjustment for both 'Fog On' and 'Fog Delay' modes. These timer functions can be expanded even further by engaging Jem's unique '8X Mode' which multiplies the selected timer setting by eight. D-Tec Vaporizing System
This unique system produces a very high smoke output using a relatively low wattage heat source. The secret is its high alluvial mass and its twin, cuprous, oval helicoils. 3.5 metre helicoils and precision casting ensure maximum heat exchange between the efficient 1500-watt heater and the twin fluid carrying coils. On-Board Remote System
Greatly appreciated by rental companies, this hand-held remote can be stored during transit on-board the machine, making it easy to find at show time and eliminating transit vulnerability. But storage isn't the only advantage. Portability is greatly enhanced by having on board controls Analogue Link
Whether you've run out of DMX channels or simply want to link two smoke/haze machines together and operate them from a single remote, Jem’s link facility is the solution. This feature even allows multi-machine connection, making operation a simple one-finger action. Fluid Container (9.5 litre)
All Jem smoke, haze and heavy fog machines are designed to carry removable fluid containers of varying sizes depending on the model's application. The removable container makes for quicker refills and protects the machine from damage through spillage in transit. Heat Exchangers (1500W)
All Jem heat exchangers are designed for high efficiency performance. Only the purest grade LM24 aluminium is used in the production process which eliminates the risk of porosity (pockets of gas within the casting which can cause heater failure). All heat exchangers contain cuprous helicoils of at least 2.8 metres in length, ensuring a continuous flow of pure, dry, white smoke.